How can you strip Ormocer coated DTG® fibers?

对不起,此内容只适用于美式英文德文。 For the sake of viewer convenience, the content is shown below in the default language of this site. You may click one of the links to switch the site language to another available language.

The ORMOCER® coating (ORganic MOdified CERamic) used on the DTG-LBL-830_1550 fiber is different from standard acrylate coating used for telecom Single Mode Fiber (SMF). The most prominent differences are: (1) its higher stiffness, (2) its improved adhesion to glass and (3) the smaller diameter of the coated fiber (195 µm as opposed to typically 250 µm).

Stripping of the ORMOCER® coating can be done either mechanically or either chemically.

Mechanical Stripping

Mechanical stripping can be done using a standard fiber optic stripping tool, as shown in the figure below.

Figure: Standard fibre optic stripping tool – Miller FO 103-D-250.

Due to the increased adhesion to glass, more force is needed to strip the fiber and the coating will come off in flakes. Therefore, after stripping, it is recommended to wipe the fiber with a cleaning solution in order to remove any remaining coating.


Chemical stripping can be done with the chemical liquid dichloromethane (methylene chloride). For this, the fiber section to be stripped has to be placed in a closed container that contains a little bit of this liquid, as shown in the picture below.

The fiber does not need to be placed in the liquid itself. It is sufficient that it is in the vapor that fills up the rest of the container. However, it needs to be kept in the container long enough: for at least 10 minutes. After that, the coating very easily comes off.


With this methodology, the coating is removed by using a combination of mechanical stripping and heating of the coating. Thermal stripping can be done by using the High Strength Adjustable Thermal Stripper. You can find more specific product information on the following link.




* 这些字段是必需的。





FBGS Technologies GmbH
Franz Loewen Straße 3
D-07745 Jena


FBGS International NV
Bell Telephonelaan 2H
B-2440 Geel


Suzhou X2 Electronic Technology Co Ltd
Room No. 2003, Building 38, No. 60 Weixin Road, Suzhou Industrial Park
215122 Suzhou, Jiangsu China